Switch Board Connection:

This diagram shows how to make a switch board connection. In this circuit, we use a fuse, an indicator light, two switches, and two power sockets. First, we need to input the phase line connection to all component phase terminals, then need to input the neutral connection to the neutral point, and lastly input the earthing connection to the power sockets earth terminal. Now this circuit is ready for use. If you want to know more about this circuit please check our youtube video below the post.

Diagram of Switch Board Connection:

Components needed For this Project:

You can get the components from any of the sites below:

Cutout Fuse [See Buy Click Amazon]
Board Indicator [See Buy Click Amazon]
Board Switch [See Buy Click Amazon]
Gang Socket [See Buy Click Amazon]

*Please note: These are affiliate links. I may make a commission if you buy the components through these links. I would appreciate your support in this way!

Read Also:

Components used to make the Switch Board Connection:

01. Fuse:

A fuse cuts off the current when the current exceeds a safe value due to short-circuiting or overloading. When the current becomes large it heats the fuse wire too much. Since the melting point of fuse wire is low it melts and breaks the circuit diagram. Cartridge fuses are low-cost electrical safety devices that are used for the overload protection of electrical circuit diagrams and appliances.

Advertisements

02. Indicator:

An indicator lamp just Sounds Technical, Sometimes it is called a Supervisory light Indicator. Indicator lights are amber in color and can be located at the Front, the Rear, and Sometimes at the Side of the car on both the left And Right-hand sides. The Common colors used by Indicator lamps are red, yellow, blue, white, and green line system. A Panel Indicator Lamp Generally has up to 5 Differently Colored Segments to Indicate Various Conditions on the Machine or Process system.

03. Switch:

An SPST (Single Pole Single Throw) Switch is a Switch That only Has a Single Input and can Connect Only to one Output. This means it Only Has one Input Terminal and Only 1 Output Terminal. A Switch is a Mechanical or Controlling Device That Changes the Flow of Current Direction or Interrupts the Flow of Current Within a Circuit diagram. An electrical line using Single Pole Single Throws (SPST) is Perfect for on-off switching. When the SPST is closed, the Circuit is Closed and the light from the lamp switches on the system. When The Single Pole Single Throw (SPST) is then opened, the light from the lamp goes out and the Circuit is off.

04. 3-Pin Socket:

A Power Socket is a Device to Which Electrical Devices Can Be Connected to Receive the Electric Current Required For Their Operation. Connected by a System of Cables to a Power Source, Usually, an Electricity Generation Facility operated by an energy Production company, generally has no moving parts. Instead, it contains metal strips that make contact with the prongs of an Electric plug inserted into the socket. It is Through these Contacts That the Electric current is Transmitted. Electrical Devices that connect to a Power Source Through a Power Socket are Considered to be Portable Because they can easily be Connected and Disconnected From the Power Source.

Thank You for visiting the website. Keep visiting for more Updates.

← Previous Next →

Switch Board Connection | Switch Board Wiring